3M - DISC-CLOTH WET/DRY 8" X NH - 500 GRIT #13085-6 - 7000045611

The 3M™ Wetordry™ Cloth Disc 281W features a strong, waterproof mesh cloth backing so the abrasive may be run wet or dry. It is commonly used for finishing on substrates like paint, e-coat primer, gel coat, and metal. Discs clip on to a hand pad (sold separately) for hand applications.

• Unique mesh cloth can be used wet or dry and helps prevent loading
• May be used for finishing on e-coat primers, gel coats, and metals
• Features aluminum oxide mineral for sharp cuts and fine finishes
• Abrasive may be attached to a hand or backup pad with clamps/clips
The 3M™ Wetordry™ Cloth Disc 281W features a strong, waterproof mesh cloth backing so the abrasive may be run wet or dry. It is commonly used for finishing on substrates like paint, e-coat primer, gel coat, and metal. Discs clip on to a hand pad (sold separately) for hand applications.

Applications:

• 3M™ Wetordry™ Products support both wet and dry applications
• In the marine industry, you can use this product for sanding old finishes, fine feather edging, and surface work
• Aluminum Oxide abrasive is widely used in grinding applications, sanding, and finishing applications

Used with water, the 3M™ Wetordry™ Cloth Disc 281W prevents loading of the abrasive during the finishing process. It prevents dust and debris from clogging the abrasive and dulling the mineral, so it can continue cutting sharp and fast. This versatile cloth product is ideal on e coat primer and may also be used dry for finishing metal and gel coats. In the marine industry, it’s commonly used for sanding old finishes, fine feather edging and surface work. The 3M™ Wetordry™ Cloth Disc 281W is made with aluminum oxide mineral, which is a popular choice among industrial professionals because of its fast cut rate and long life. This mineral is tough and durable, self fracturing to expose fresh cutting edges. Conversely, traditional natural minerals like garnet dull more quickly. Due to its fast cut rate, hardness, and strength, aluminum oxide is widely used in grinding, sanding, and finishing applications. It’s suitable for a wide variety of materials in both metalworking and the marine/fibreglass markets. 3M™ Wetordry™ Products were engineered to include a waterproof cloth backing, which supports both wet and dry applications. At the same time, these applications tend to produce a significant amount of dust, clogging the abrasive points and creating an inferior work environment. These effects may be minimized by sanding with water to rinse dust away from the workpiece and the abrasive surface. Having a water resistant abrasive can come in handy when finishing on materials like paint and primer. As these substrates tend to generate a lot of debris, the 3M™ Wetordry™ Cloth 281W can be paired with water to keep both the abrasive and workpiece clean and produce the soft finish industry professionals desire.